Din varukorg är tom, fortsätt handla på Jakt.se.
Kundvagnen uppdateras
Populära länkarKategorier
Fördelar med oss
|
Produkten läggs i din varukorg
![]()
Produkten har lagts till i din varukorg
Spuhr 34mm Unimounts for Picatinny
3 395 kr
Köp & prenumerera För automatisk leverans av den här produkten välj intervall nedan och tryck på "KÖP"-knappen. Du får varan levererad omgående och sedan samma datum varje period tills du väljer att avsluta prenumerationen. Läs mer om prenumerationer.
Spuhr 34mm Unimounts for Picatinny
ISMS - IDEAL SCOPE MOUNT SYSTEM Extremely sturdy scope mount, with possibility to attach multiple optical accessories directly to the mount. Built-in level. 45-degree split of the rings provides unobstructed view of the knobs. Durability Prevents damage on scope due to flexing during heavy recoil or rough handling. The snipers rifle and the spotter’s carbine can have the same mount, enabling the use of the same or shared equipment and accessories. The rings are grooved on the inside for a better grip of the scope and to enable gluing of the scope. The mount base is milled from a single billet of aluminum. Scope rotation Innovative solution for indexing the rotation of the scope, using the included tool/gauge to index the scope correctly to the mount and gun. This is very important since if the scope is not properly indexed there will be an unintended lateral shift of the point of impact whenever the elevation is adjusted. Mounting placements Traditionally lasers have been mounted on the forend of the rifle, a solution with drawbacks. For the same reasons you don’t want your barrel to touch the forend you don´t want the sights to be mounted on the forend. Our mounting system have a minimum of seven interfaces for accessories, and the laser can easily be attached to the scope mount, providing the advantage of undisturbed laser and having the weight close to the centre of the gun instead of forward. Tilt Mounts can be delivered in various tilts. The tilt is clearly engraved on the mount, in both MIL and MOA. Accessible and readable dials The rings are cut at 45 degrees instead of horizontaly, providing several advantages; the screws holding the parts together are not obscuring the knobs, thus the shooter can quickly determine the settings of the knobs. It also gives the shooter a horizontal reference line helping the shooter subconsciously to avoid canting the rifle to the side. The rings have index marks on the top and right side, making low knobs more easily readable. Accessories Provides use of various accessories such as angle cosine indicator (ACI), back up sights, lasers, illuminators, night vision mounts etc. with a minimized ”footprint”. With traditional mounts this can only be achieved if there is sufficient space on the middle tube for additional rings, which there rarely is. The Ideal Scope Mount System have interface surfaces directly on the mount, making it possible to mount accessories either by Picatinny rails or as direct interfaces. A selection of interfaces for popular accessories are available, and others can be made to customer specifications. Level The sight mount have a level included in the rear of the mount. SPECIFICATION Rail Interface:................ Picatinny rail Ring diam:..................... 34 mm Tilt:................................ Delivered in various tilts Weight:.......................... 200-275 gram depending on model Height:.......................... depending on model Material:........................ 7075 Aluminum, Stainless steel screws Surface treatment:.......... Hard coated sealed surface
s betyg
EAN:
7340150700249
Andra köpte även: |